Failure Analysis


 | Electrical Testing| Non-Destructive Evaluation| Destructive Evaluation| Contact Us|


- Electrical Testing - Contact Resistance Measurements -

4285A Precision LCR meter (75 KHz - 30 MHz)

The Agilent 4285A precision LCR meter is an equipment for passive components (Inductors, Capacitors, and Resistors) and material measurement. For demanding RF component tests, the 4285A offers a higher test-frequency range, from 75 kHz to 30 MHz. The external DC voltage bias fixture enables measurement of passive components with DC bias up to 200V.

Material Evaluation
The Agilent E4991A provides the total dielectric/magnetic material measurement solutions in wide frequency range (1 MHz to 1 GHz).

Features:

  • 75 kHz to 30 MHz in 100 Hz steps
  • 0.1% basic accuracy
  • High-speed measurements: 30 ms/meas.
  • Constant V or I test signal level
  • List sweep measurement capability
  • Test fixture for both leaded and surface mount components

4263B LCR meter (100 Hz - 100 KHz)

The Agilent 4263B LCR meter is an equipment for passive components (Inductors, Capacitors, and Resistors). The 4263B has five test frequencies that allow us to simulate testing under the correct conditions: 100 Hz, 120 Hz, 1 kHz, 10 kHz, and 100 kHz. The external DC voltage bias fixture enables measurement of passive components with DC bias up to 200V.

Features:

  • 0.1% basic accuracy
  • 20 mV to 1 Vrms in 5m Vrms steps
  • Test signal level monitor function
  • High-speed measurement: 25 ms/meas.
  • Wide capacitance test range

Introduction


Electrical Testing IC Functional and Parametric Testing

Impedance / Material Analyzer

Continuity Measurements

Surface Resistance Measurements

Contact Resistance Measurements

Resistance Monitoring during Accelerated Testing

Capacitance Measurements

Oscilloscope