Abstract:

A novel technique for suppressing power plane resonance at microwave and radio frequencies is presented. The new concept consists of replacing one of the plates of a parallel power plane pair with a high impedance surface or electromagnetic band gap structure. The combination of this technique with a wall of RC pairs extends the lower edge of the effective bandwidth to dc, and allows resonant mode suppression up to the upper edge of the band-gap. The frequency range for noise mitigation is controlled by the geometry of the HIGP structure.

Complete article is available to CALCE Consortium Members.

© IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.